BUILD YOUR OWN: Oversized Polyhedral Squishy Dice

$12.00 – $50.00

Please note this listing is for a random color and firmness item. Customization is not available on these listings; if you want to guarantee specific colors or patterns, please see the Build Your Own listings. Sets may not have matching colors (because they were probably remnants from other failed/incomplete sets I’ve Frankensteined together so there’s enough dice)

Dice are about 25% larger than standard playing dice for readability and durability

Full set includes: D2, crystal OR caltrop D4, D6, D8, D10, D12, D20, D100s

Dice may have small bubbles on the 1 face because of how they’re molded. They’re also hand trimmed and some edges may be slightly uneven from the trimming process. These are not reasons I will consider these flops for these models.

Dice do not come inked.

These models don’t play nicely with some of the traditional patterning. Please don’t select multi-section stuff (if you do I’ll reach out about it) as the holes to pour through are physically small and don’t work well for that. There might be some variance between colors in each dice (die? who even knows anymore) for things like ‘soft marble’ and ‘ribboning’ depending on how the silicone comes out of the cup. Vertical stripes is also not an option that will work (but horizontal stripes will look similarish). Thanks for your understanding <3

Custom Options

The tab at the bottom of the page has links that might help you choose your custom colors and a gallery of color swatches.

  • What type of colors do you want? *

  • Colors and patterning of Dealer’s Choice listings are entirely up to the shop. If you want more customization, please select one of the other options. They are discounted to make things more affordable. *

  • Please note that the color selections below are not guarantees, but I’ll do my best to honor them in the final pour. You don’t need to choose colors from the swatch page if you don’t want to or you can just write in an abstract prompt like ‘ocean’. *

  • Write 1-3 color(s) you really like *

    Max: 50 characters

  • And 1-3 color you really hate *

    Max: 50 characters

  • Some of the pre-defined colors come with specific ways they’ll be poured and the pour pattern cannot be selected. Options will hide/show accordingly. *

  • Inclusion Type *

  • Chip Color *

  • Ice Cream Color (Select UP TO 2 colors that will have chips mixed in) *

  • Swirl Color (To be stripped/drizzled into main ice cream color) *

  • Pre-Defined Colors *

  • Pride Colors *

  • Rainbow Sheen * 

  • Add additional color? * $2.00

  • Glow options will guarantee dealer’s choice glow is added to your toy. Normally I’ll choose glows that correspond to the colors in the rest of the pour unless requested othewise. *

  • Pour Pattern *

  • A list of all color swatches are linked in the tab at the bottom of all custom listings. *

    Color MatchingFeel free to write in custom colors (like ‘teal’) and I’ll do a random mix for you. I make no guarantees the color you get will be what was in your head.
    GlowGlow is included in the price; Just write in ” [regular color you want] + [color glow you want]”.
    Custom Color MixesIf you want me to combine multiple colors (not including color shifts), just write all the ones you want in the box (ex: Chameleon PRB + UV Purple + Gold Sparkle + red glow). I make absolutely 0 guarantees if your weird mix of colors doesn’t come out the way you want.

  • Color 1 *

    Max: 30 characters

  • Color 2 *

    Max: 30 characters

  • Color 3 * $3.00

    Max: 30 characters

  • Color 4 * $5.00

    Max: 30 characters

  • Color 5 * $5.00

    Max: 30 characters

  • Color 6 * $5.00

    Max: 30 characters

  • Color 7 * $5.00

    Max: 30 characters

  • Color 8 * $5.00

    Max: 30 characters

  • Color 9 * $5.00

    Max: 30 characters

  • Color 10 * $5.00

    Max: 30 characters

  • Pour Pattern Notes *

    FadeWill be done in the order of colors selected with Color 1 at the tip and Color 10 at the base. Fades may also contain some light ribboning (especially if poured with matte colors or firm silicone)
    Hard DividesIs just the toy being split into sections for each color from left to right. Outer colors are generally the most prominent while middle colors tend to be smaller strips. Hard divides on models with super narrow necks might get a little smeared.
    Horizontal StripesAre poured wet and won’t have perfectly crisp divides between colors. May also have drips on the side of the toy.
    Feathering / Hounds Tooth / Tie DyeAre all permutations of the same pour and may have some similarities between the styles. Houndstooth gets a little blurred sometimes on models with knots or curves but does awesome on things with straight sides or uniform taper.
    RibboningIs more prominent with contrasting colors. May be slightly ribboned or very ribboned – it’s kind of variable depending on colors/model/firmness. I’ll do my best to get contrasting ribbons where possible.

  • Pour Pattern (Main Shaft) *

  • Splatter background *

    Max: 30 characters

  • If you have more than 2-3 colors in the shaft, please describe any additional details I might need (like a hard divide with a 2 color fade on each side, etc) * 

  • Additional Shaft Details *

    Max: 200 characters

  • Adding Twist to the toy might not play nice with certain models (anything with mad curve) and can cause smearing on the edges. Where applicable I’ll make the twist more minimal along the curved area, then spiral it harder on the straighter parts to prevent said smears. *

  • Base Color 1 *

    Max: 30 characters

  • Base Color 2 * $5.00

    Max: 30 characters

  • Base Color 3 * $5.00

    Max: 30 characters

  • Base Pour Pattern *

  • Drips *

  • Drip Color 1 *

    Max: 30 characters

  • Drip Color 2 * $5.00

    Max: 30 characters

  • Drip Color 3 * $5.00

    Max: 30 characters

  • Pattern (If choosing multiple Ice Cream Colors) *

  • Wash Color *

    Max: 30 characters

  • Shifty Color *

  • Back with another color? *

  • FIRMNESS *

    Options will show/hide themselves depending on the pour style you’ve chosen. Mostly some things don’t play nice with near clear or firm so those options aren’t always available.

  • Firmness (Standard Options) *

Dice Inking Options

  • Ink My Dice! *

  • Do you want to pick the colors, or should I pick them? *

  • What should I prioritize? *

  • You can pick a single color, or multiple colors from the ‘Color Swatches’ page to mix together into a single color, or you can just write a custom color or put in a hex code and I’ll do my best to custom mix something to that shade. Glow is available for the numbers. If you want some kind of crazy custom inking job (multiple colors per dice or per number) please reach out prior to purchasing or have a backup solid color you’d be ok with. *

  • What (single) color do you want for all your numbers? *

Product total

Options total

Grand total

SKU: N/A Categories: , , , , , , , ,

Additional information

Weight 4.8 oz
Dimensions 6.6 × 6.6 × 7.6 cm
Number of Dice

Full Polyhedral Set, Crystal D4, Full Polyhedral Set, Caltrop D4, D6, D20, D2, Crystal D4, Caltrop D4, D8, D10, D12, Decader/D100, Full Polyhedral Set, No D4 Preference

I have some resources made!

Gallery of all color swatches: https://somethingsquishytoys.com/color-swatches/

Gallery of different pour patterns: https://somethingsquishytoys.com/pour-patterns/

Some thoughts on choosing colors: https://somethingsquishytoys.com/custom-color-tips/

Some thoughts on patterning: https://somethingsquishytoys.com/pattern-guide/

If you have any more questions, or the custom form in the listing can’t handle what you were hoping for, feel free to reach out 🙂

Squishies are sold at a lower rate than regular toys intended for bodily use. They are still made of the same silicone and use the same pigments, but they won’t be flopped unless there is something extreme happening with them.

This means that squishies may have small bubbles, pigment clumps, etc in them that won’t be discounted or counted as a flop and won’t be eligible for refunds due to undisclosed flops after delivery. These will usually be be noted in the listing description on pre-made items and may show up in dealer’s choice items. Flaws won’t be anything dangerous or messy (like liquid pigment pockets)

*Polyhedral Dice
–MetricImperial
D231mm1.2in
D423mm.9in
D4 (Crystal)36mm tall, 15mm wide1.4in wide, .6in tall
D618mm.8in
D832mm1.3in
D10 & Decader32mm1.3in
D1228mm1.1in
D2031mm1.2in
50mm D2050mm2in

Related products