Name: BUILD YOUR OWN: Gummy Worm
SKU: 9442
Price: 130.00 USD
Availability: InStock

Additional information

Weight	30 oz
Dimensions	9.6 × 9.6 × 17.7 cm
Size	Long, Short

I have some resources made!

Gallery of all color swatches: https://somethingsquishytoys.com/color-swatches/

Gallery of different pour patterns: https://somethingsquishytoys.com/pour-patterns/

Some thoughts on choosing colors: https://somethingsquishytoys.com/custom-color-tips/

Some thoughts on patterning: https://somethingsquishytoys.com/pattern-guide/

If you have any more questions, or the custom form in the listing can’t handle what you were hoping for, feel free to reach out 🙂

–	Short	Long	Minis / Squishies
Length	415mm / 16.3in	670mm / 26.3in	110mm / 4.3in
Width	62mm / 2.4in	51mm / 2in	13mm / .5in
Height	43mm / 1.7in	37mm / 1.4in	9mm / .3in
Section Length	20mm / .8in	20mm / .8in	4mm / .1in
Head Max Width	65mm / 2.6in	54mm / 2.1in	12mm / .5in
Circumference	167mm / 6.6in	140mm / 5.5in	33mm / 1.3in

	Color Matching	Feel free to write in custom colors (like ‘teal’) and I’ll do a random mix for you. I make no guarantees the color you get will be what was in your head.
	Glow	Glow is included in the price; Just write in ” [regular color you want] + [color glow you want]”.
	Custom Color Mixes	If you want me to combine multiple colors (not including color shifts), just write all the ones you want in the box (ex: Chameleon PRB + UV Purple + Gold Sparkle + red glow). I make absolutely 0 guarantees if your weird mix of colors doesn’t come out the way you want.

	Fade	Will be done in the order of colors selected with Color 1 at the tip and Color 10 at the base. Fades may also contain some light ribboning (especially if poured with matte colors or firm silicone)
	Hard Divides	Is just the toy being split into sections for each color from left to right. Outer colors are generally the most prominent while middle colors tend to be smaller strips. Hard divides on models with super narrow necks might get a little smeared.
	Horizontal Stripes	Are poured wet and won’t have perfectly crisp divides between colors. May also have drips on the side of the toy.
	Feathering / Hounds Tooth / Tie Dye	Are all permutations of the same pour and may have some similarities between the styles. Houndstooth gets a little blurred sometimes on models with knots or curves but does awesome on things with straight sides or uniform taper.
	Ribboning	Is more prominent with contrasting colors. May be slightly ribboned or very ribboned – it’s kind of variable depending on colors/model/firmness. I’ll do my best to get contrasting ribbons where possible.

BUILD YOUR OWN: Gummy Worm

Custom Options

What type of colors do you want? *

Colors and patterning of Dealer’s Choice listings are entirely up to the shop. If you want more customization, please select one of the other options. They are discounted to make things more affordable. *

Please note that the color selections below are not guarantees, but I’ll do my best to honor them in the final pour. You don’t need to choose colors from the swatch page if you don’t want to or you can just write in an abstract prompt like ‘ocean’. *

Write 1-3 color(s) you really like *

And 1-3 color you really hate *

Some of the pre-defined colors come with specific ways they’ll be poured and the pour pattern cannot be selected. Options will hide/show accordingly. *

Inclusion Type *

Chip Color *

Ice Cream Color (Select UP TO 2 colors that will have chips mixed in) *

Swirl Color (To be stripped/drizzled into main ice cream color) *

Pre-Defined Colors *

Pride Colors *

Rainbow Sheen *

Add additional color? * $2.00

Glow options will guarantee dealer’s choice glow is added to your toy. Normally I’ll choose glows that correspond to the colors in the rest of the pour unless requested othewise. *

Pour Pattern *

A list of all color swatches are linked in the tab at the bottom of all custom listings. *

Color 1 *

Color 2 *

Color 3 * $3.00

Color 4 * $5.00

Color 5 * $5.00

Color 6 * $5.00

Color 7 * $5.00

Color 8 * $5.00

Color 9 * $5.00

Color 10 * $5.00

Pour Pattern Notes *

Pour Pattern (Main Shaft) *

Splatter background *

If you have more than 2-3 colors in the shaft, please describe any additional details I might need (like a hard divide with a 2 color fade on each side, etc) *

Additional Shaft Details *

Adding Twist to the toy might not play nice with certain models (anything with mad curve) and can cause smearing on the edges. Where applicable I’ll make the twist more minimal along the curved area, then spiral it harder on the straighter parts to prevent said smears. *

Base Color 1 *

Base Color 2 * $5.00

Base Color 3 * $5.00

Base Pour Pattern *

Drips *

Drip Color 1 *

Drip Color 2 * $5.00

Drip Color 3 * $5.00

Pattern (If choosing multiple Ice Cream Colors) *

Wash Color *

Shifty Color *

Back with another color? *

FIRMNESS *

Firmness (Standard Options) *

Worm Patterning Override

Section Count (Backend Only) *

Toy Type (backend only) *

IMPORTANT: make sure your using 2-4 colors for a long worm and 2 colors for a short worm *

Please note this will override the ‘section pour pattern’ options entirely (just pick ‘single color’ or whatever other free option for that) *

If you want a (long) worm with more than 4 stripes, I CAN do that, but you’ll need to select all the colors you want in a single section and then choose ‘vertical stripes’ for the pour pattern. *

Only available for ‘build your own’ toys with a single section *

backend only (cancel section count) *

backend only (cancel toy type) *

Additional information

Related products

Large Fur Coat 16, Medium Firmness – Messy Flouro Grid

BUILD YOUR OWN: Ice Cream

BUILD YOUR OWN: Scaled Wave

Small Armor Dong 4, Soft – Red Black Shimmer Split