–	Metric	Imperial
A – Total Length	90mm	3.5in
B – Top Diam.	45mm	1.8in
B – Side Diam.	21mm	.8in
C – Arm Length	18mm	.7in
D – Tail Length	22mm	.9in

Features:

A myriad of different textures to fiddle with and little legs to smoosh

Anal Safe:

No

Stands up in:

Sits flat

Back Story:

Commission squishy

–	Metric	Imperial107
Height	45mm	1.8in
Length	107mm	4.2in
Width Widest	51mm	2in

Features:

Lots of subtle textures that are kind of fun to rub your nail over

Anal Safe:

No

Stands up in:

All sizes, all firmnesses

Back Story:

My dad is really into bird watching after he retired, so I actually made this to mold in food-safe silicone and turn into bird-shaped chocolate bombs (which I did and I could stuff like 10 marshmallows into each one muahaha) and I also figured I’d turn them into silicone squishies while I was at it.

There are no pre-defined sizes for that which is chaos! Fear the Chaos Loaf!!!

Features:

• Lots of holes and air pockets that make even large volumes very satisftying and easy to smush (great for people like me with weak fingers)
• Very auditory
• Uses up old scrap silicone which I have no other way to get rid of

not for internal use:

Because of all the crevices in this, it shouldn’t be used internally under any circumstances

Stands up in:

Who knows what shape these will even be when I finish with them.

Back Story:

I just wanted to see what would happen if I lightly glued old silicone scraps together with more silicone and the result was even more satisfying than I expected.

–	Metric	Imperial
Small	24mm	.9in
Chonky	49mm /	1.9in

Features:

• Lots of little ridges and holes to poke your fingers into
• Realistic coloring (on the smaller cube packs)

Anal Safe:

No

Stands up in:

All sizes, all firmnesses

Back Story:

I had this whole cosplay planned out where I was going to make silicone slabs of cheese and build it like leather armor, but then covid happened so I didn’t end up following through on that. But out of that was born the little cheese cubes (which I was also planning on leaving around the con randomly)

–	Metric	Imperial
D2	31mm	1.2in
D4	23mm	.9in
D4 (Crystal)	36mm tall, 15mm wide	1.4in wide, .6in tall
D6	18mm	.8in
D8	32mm	1.3in
D10 & Decader	32mm	1.3in
D12	28mm	1.1in
D20	31mm	1.2in
50mm D20	50mm	2in

Features:

• Full set of playable dice and/or a chonk D20
• Larger numbers for easier readability
• 125% the scale of standard dice for ease of handling

Anal Safe:

Absolutely not

Stands up in:

They roll damn it.

Back Story:

3D printing led me to dildos, me already having silicone and 3d printers led me to making resin dice. And I figured I’d also make some out of silicone. I also sell printed masters for those that want to spend 15 hours polishing things and making their own dice.

If enough people ask for a full set of giant dice I will totally do it…

–	Small	Medium	Large
Total Height	66mm / 2.6in	76mm / 3in	84mm / 3.3in
A — Flan Height	53mm / 2in	58mm / 2.3in	66mm / 2.6in
B — Diam.	35mm / 1.4in	43mm / 4in	47mm / 1.9in
C — Diam.	57mm / 2.3in	65mm / 2.6in	74mm / 2.9in
B — Circumf.	110mm / 4.3in	135mm / 5.3in	148mm / 5.81mm
C — Circumf.	178mm / 7in	204mm / 8in	232mm / 9.1in

Features:

• Benign design that’s good to sit on a desk at work
• Textured Raspberry that’s quite fun to run your thumb over

Anal Safe:

No

Stands up in:

All sizes, all firmnesses

Back Story:

Back when I first made this I was like ‘this could be an egg right’? Then I decided the large flat base meant it should be banished it to squishy land.

–	Metric	Imperial
Height With Ears	66mm	2.6in
Height Body Only	55mm	2.2in
Diameter	55mm	2.2in
Circumference	173mm	6.8in

Features:

Goofy little face and a fur texture that’s kind of run to run your fingers over

Anal Safe:

No

Stands up in:

All sizes, all firmnesses

Back Story:

This just exists because I happened to be sculpting the OddBody and figured I may as well make a tiny version.

–	Large	Minis/Squishies
Length	73mm / 2.9in	30mm / 1.2in
Width	42mm / 1.7in	18mm / .7in
Height	28mm / 1.1in	13mm / .5in

Features:

It’s a gummy bear – I’m not sure if a gummy bear needs features?

Anal Safe:

No

Stands up in:

All sizes, all firmnesses (It does actually stand up on it’s little feet)

Back Story:

I made tiny 8mm gummy bear molds to cast in resin and use in dice and these are just those but bigger. (I sell those 8mm bear molds btw; contact me if you’re interested in them)

–	Minis / Squishies
Length	110mm / 4.3in
Width	13mm / .5in
Height	9mm / .3in
Section Length	4mm / .1in
Head Max Width	12mm / .5in
Circumference	33mm / 1.3in

Features:

Ridges and the ability to be tied in a knot?

Anal Safe:

No

Stands up in:

lies flat

Back Story:

This is just a smaller version of my large gummy worms.

–	Metric	Imperial
Total Height	85mm	3.3in
A — Avg. Diam.	30mm	1.3in
B — Avg. Diam	50mm	1.9in
C — Avg. Diam.	47mm	1.8in
D — Avg. Diam.	25mm	1in
A — Circumference	87mm	3.4in
B — Circumference	150mm	5.9in
C — Circumference	146mm	5.75in
D — Circumference	75mm	3in

Features:

• More traditional stress ball type shape with fun little fidget tubes coming off it.
• Theoretically could also be used as an egg (but wasn’t designed specifically for that purpose)

Anal Safe:

No

Stands up in:

Depends a lot on the pour and how the base gets trimmed.

Back Story:

I had this model sitting around for years (It was originally a 3d printable planter) and I was like ‘yo this would make a cool squishy’.

–	Metric (mm)	Imperial (inches)
Length	70	2.75
Width	69	2.71
Max Height	21	.82

Features:

• Flat design that’s easy to bend/twist
• Thinner ridges towards the edges make for good thumb-fiddlin’
• Inconspicuous design that’s good for a benign pocket squishy.
• This shape is really good at pilling pet hair off furniture/clothes so it can be easily picked off

Anal Safe:

No

Stands up in:

Sits flat

Back Story:

Another thing I was planning a whole series for and only did one. I had a gyoza sculpted, but saved the file wrong and lose 2 hrs of sculpting.

This thing is one of my favorite squishies though and I have a few friends who fight over any who flop too badly to sell in the shop 😛

–	Metric	Imperial
Height	68mm	2.7in
Max-Width	46mm	1.8in
Max-Depth	43mm	1.7in

Features:

The feeling it’s trying to make a SQUAWKing noise at you when you look at it and a small spru on the bottom side of the cap

Anal Safe:

I guess technically if you insert it feet first but it’s pretty small/wasn’t designed as an actual toy

Stands up in:

medium firmness and above (usually)

Back Story:

I just wanted to live stream something and see what happened. Shroom-Stache was apparently the answer. Which is why I’ll never do a live stream again (not really).

–	Small	Medium	Large
Total Height	42mm / 1.7in	56mm / 2.2in	68mm / 2.7in
A – Avg. Diam.	17mm / .7in	26mm / 1in	30mm / 1.2in
B – Avg. Diam.	33mm / 1.3in	44mm / 1.7in	53mm / 1.7in
C – Avg. Diam.	17mm / .7in	26mm / 1in	30mm / 1.2in
A – Circumf.	54mm / 2.1in	82mm / 3.2in	94mm / 3.7in
B – Circumf.	104mm / 4.1in	138mm / 5.4in	166mm / 6.6in
C – Circumf.	54mm / 2.1in	82mm / 3.2in	94mm / 3.7in

Features:

A delightful little stem that’s fun to boop.

Design is seamed

Anal Safe:

No

Stands up in:

All sizes, all firmnesses (unless the base is trimmed weird)

Back Story:

I just chopped the base off the ‘what a pear’ because nobody ever wants that design, but I really like pouring the pear. I’m a person of simple and oft food-themed interest.

–	Small	Medium	Large
Total Length	135mm / 5.3in	170mm / 6.7in	205mm / 8in
A — Height Bulb	58mm / 2.3in	74mm / 2.9in	88mm / 3.5in
B — Bulb Max Diam.	39mm / 1.5in	50mm / 4.7in	59mm / 2.3in
B — Circumference	148mm / 5.8in	120mm / 4.7in	89mm / 3.5in

Features:

• Smooth bulb and little ‘cord’
• Can be used as a squishy or an egg (with caution on the egg)
• This design is also seamed with a seam running along the entire tail and on some of the bulb and there will be a rough spru mark at the end of each tail from where the pour spout was trimmed off

Anal Safe:

No

Stands up in:

None of the sizes

Back Story:

I made and printed 100s of tiny sperm for a guy to encase in ‘loaded dice’ once and I figured ‘why not turn these into a squishy with some mods’. So I did.

(Also you can use the code ‘POTIONS20’ for 10% off anything in the guy’s shop. I also designed some potion bottle dice for him that came out pretty neat)

–	Length	Width	Height
Egg	68mm / 2.7in	42mm / 1.6in	34mm / 1.3in
Crab	80mm / 3.2in	40mm / 1.5in	36mm / 1.4in
Shrimp	102mm / 4in	42mm / 1.6in	35mm / 1.3in
Salmon	87mm / 3.42in	44mm / 1.8in	32mm / 1.2in
Eel	91mm / 3.58in	41mm / 1.6in	36mm / 1.4in

Features:

• Lumpy rice?
• Features designs with egg, crab, shrimp, salmon and eel

Anal Safe:

No

Stands up in:

none of the sizes or firmnesses

Back Story:

I accidently made some tiny squishies from the VERY failed sushi anal beads (which were a commission that kept failing so I figured ‘what the heck I might as well cut these apart at the sushis and sell them). I planned on making larger versions but just never really followed through. It is an idea I’ve been considering revisiting recently because I think the sculpts came out super nice.

–	Metric (mm)	Imperial (inches)
Total Length	102	4
Max Width	60	2.4
Height	30	1.2

Features:

A relatively thick/ridged body and lots of subtle ridges along the back

Anal Safe:

No

Stands up in:

Lays flat

Back Story:

This was a commission squishy – there’s not really a story there 😛

–	Small	Giant (X-Large)
A — Width No Spines	43mm / 1.7in	83mm / 3.2in
B — Width Including Spines	62mm / 2.5in	120mm / 4.8in
Height	33mm / 3in	64mm / 2.5in

Features:

Lots of little spines that are deliciously fun to fiddle with. (Some of the spines on the smaller size catch bubbles at the tips; this isn’t something the urchin will be discounted for and this isn’t an issue on the giant urchin)

Anal Safe:

No

Stands up in:

All sizes, all firmnesses

Back Story:

Long spine urchins have been one of my favorite sea creatures ever since I saw them at a nice aquarium store when I was a kid. I thought the little red and yellow eye on their back was super cool. Turns out that’s their anus, but whatever?

I figured a pudgy version would be fun.

–	Metric	Imperial
Length	61mm	2.4in
Width	40mm	1.6in
Height	20mm	.8in

Features:

A little indent that’s kind of fun to suction onto your thumb

Anal Safe:

No

Stands up in:

It lays flat

Back Story:

I as planning to a series of hand-sculpted vulva types to represent different vulvas, but I only ended up making the one. I keep thinking about making more.